伊莉莎岡特貿易（上海）有限公司機床子網站！
伊莉莎岡特貿易（上海）有限公司機床子網站！
產品型號： NDA.T
更新日期： 2025-09-13
所 在 地： 上海市閔行區光華路248號漕河涇光華園1號樓1201
產品特點： 用于圓管的端帽型號主要規格材料聚酰胺基（PA）高科技聚合體手柄，黑色，亞光飾面。
| 品牌 | 伊莉莎岡特/Elesa+Ganter |
|---|
用于圓管的端帽
材料
聚酰胺基（PA）高科技聚合體手柄，黑色，亞光飾面。
特征及應用
用于帶可調高度水平調整件的圓形管的端帽。
安裝時只需簡單地將端帽定位，壓入管內部，無需螺釘或其它緊固件。
| 代碼 | 說明 | D | d | h | h2 | s | 外管直徑 | 內管直徑 min-max |
|---|---|---|---|---|---|---|---|---|
| 430471 | NDA.T-20-M12x30 | 20 | M12 | 34 | 32 | SW19 | 20 | 18-17 |
| 430476 | NDA.T-22-M12x30 | 22 | M12 | 34 | 32 | SW19 | 22 | 20-19 |
| 430481 | NDA.T-25-M12x30 | 25 | M12 | 34 | 32 | SW19 | 25 | 23-21 |
| 430486 | NDA.T-28-M16x30 | 28 | M16 | 34 | 37 | SW27 | 28 | 26-24 |
| 430491 | NDA.T-30-M16x30 | 30 | M16 | 27 | 37 | SW27 | 30 | 27-26 |
| 430496 | NDA.T-30-M22x30 | 30 | M22 | 27 | 35 | SW27 | 30 | 27-26 |
| 430501 | NDA.T-32-M22x30 | 32 | M22 | 34 | 35 | SW27 | 32 | 30-28 |
| 430506 | NDA.T-35-M22x30 | 35 | M22 | 34 | 35 | SW27 | 35 | 32.6-31 |
| 430511 | NDA.T-38-M22x30 | 38 | M22 | 34 | 35 | SW27 | 38 | 35-34 |
| 430516 | NDA.T-40-M22x30 | 40 | M22 | 34 | 35 | SW27 | 40 | 38-36 |
| 430521 | NDA.T-45-M22x30 | 45 | M22 | 34 | 35 | SW27 | 45 | 42-41 |
| 430526 | NDA.T-50-M22x30 | 50 | M22 | 34 | 35 | SW27 | 50 | 47-46 |
* The value refers to laboratory tests carried out with a load applied vertically to the leveling element unscrewed from the end-cap of 10 mm and leaning on a flat surface. The max limit static load is the value above which the load applied to the element may cause some plastic material breakage, under particular conditions of use. Obviously, a factor that takes into consideration the importance and the safety level of the specific application must be applied to this value.
端蓋插入管中的部分的幾何形狀可以針對不同的尺寸而變化。
掃一掃,關注我們
